home *** CD-ROM | disk | FTP | other *** search
- ┌─────────┐
- ┌─────┴───┐ │ (R)
- ──│ │o │──────────────────
- ComputerEase Business Systems │ ┌─────┴╨──┐ │ Association of
- 7204 John Elizabeth Place │ │ │─┘ Shareware
- Prince George, VA 23875 └───│ o │ Professionals
- ──────│ ║ │────────────────────
- └────╨────┘ MEMBER
-
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- ChronoLog Version 1.1 - QUICK INSTALLATION INSTRUCTIONS
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- If you have a ChronoLog "master" diskette(s), one 3 1/2" or two 5 1/4"
- floppy(s), the files are not compressed. There should be at least 15 files.
- See the file PACKING.LST for a listing of the minimum files required. Do
- not erase any of the system files!
-
- This procedure works the same for a first-time installation, or an upgrade
- (replacing an already installed version with a newer one).
-
- Use the following procedure to install:
-
- - Insert the 3 1/2" floppy or 5 1/4" floppy #1 (contains the
- file CLINST.EXE) into a floppy drive.
-
- - At the DOS prompt, type A:CLINST (or B:CLINST if that is the drive).
- This runs the ChronoLog System Installation Program which will
- create a subdirectory on your hard drive and copy the system files
- into it. (If loading from 5 1/4" floppy, you will be prompted to
- insert floppy #2.). CLINIT (the ChronoLog Database Initialization
- Program) and then CHRONO will both execute automatically.
-
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- If you have the ChronoLog files compressed into a single file (the
- file name should be CHRON110.xxx, where xxx is the compression
- extension such as ZIP, or EXE if it is a self-extracting file),
- use the following installation procedure:
-
- - You do not need to run CLINST. Instead make sure that the
- compressed file has been copied to the subdirectory on your
- hard drive wherein you want the ChronoLog system files to reside.
-
- - Decompress CHRON110.xxx. If the decompress is successful,
- you may delete CHRON110.xxx.
-
- - There should be at least 15 files when decompressed. See the
- file PACKING.LST for a listing of the minimum files required.
-
- - Type CLINIT (the ChronoLog Database Initialization Program) to
- initialize a database in the subdirectory where the system files
- reside. CHRONO will then execute automatically.
-
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
- NOTE...IF YOU HAVE ANY PROBLEMS WITH INSTALLATION, YOU MAY ACCOMPLISH THE
- SAME PURPOSE BY:
-
- - MANUALLY CREATING A SUBDIRECTORY ON YOUR HARD DRIVE
-
- - COPYING ALL SYSTEM FILES INTO THE SUBDIRECTORY
-
- - RUNNING CLINIT
-
- - RUNNING CHRONO
-
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-